The latest version of honestechTVR2.5 is 2.5, released on 04/30/2013. It was initially added to our database on 10/29/2007. The most prevalent version is 2.5, which is used by 80 % of all installations.
Thanks a lot for the tips I solved my problem with windows 10 and EasyCAP_USBVID_1B71&PID_3002_FullCD.zip . I was looking for a solution during a long time. in fact I used to capture with the USB equipment from Magix but in my opinion the movie colours were a little grewish. easycap was much better (Brighter colours). I also met a problem using Easycap the software included in honestech TVR2.5 (included in the fullCD.zip) did not work so I changed it to Cyberlink power director and I obtained good résult. To summerize my solution is:easycapEasyCAP_USBVID_1B71&PID_3002_FullCD.zipWindows 10Cyberlink power directorVery good job here thanks again
Honestech Tvr 2.5 Software For Windows 7 64 Bit
I have a ezcap usb 2.0 (USB\VID_1C88&PID_1001&MI_00\7&3723DE77&0&0000)I tried to load the window 10 drives that came with it, that did not work, then I tried to load driver through device manger ,but got an error windows encountered a problem installing the drivers for your device.So I tried toDisable driver signing enforcement, but still had same problemany ideas from anybody
I purchased the Easy Capture. My laptop would not run the mini disc that came with it. I downloaded the software through your site. It is asking me for my product key. Any ideas where to get that for the vhs to dvd application.
I have an hp windows 10 computer and ordered the FAVOLCANO Easycap USB 2.0 Audio Video VHS to DVD Converter Capture Card Adapter. The cd I received has nothing to do with the installation. Do you have a link I can use to download?
I have windows 10 64bit and have install EasyCap W7 W10 x64.zip (aka Easycap 4Ch USB DVR W10, W7, x64) , I did the installation and the programme is there but nothing works when I try to transfer a video from a not to hold mini vhs camera. Is it the sofware?
Thank you so much for the post, the driver EasyCap-W7-W10-x64 work fine for my easy capture.However, the serial number of SW honestech TVR 2.5 does not correct, so I can not use the application.Do you have any update for this?Anyway, thanks a lot for your artical!
hello , i have same issue with you. pls i need the software and drivers. i formated my pc without backup. i recently noticed that i have lost my software disc. you can reply me via email ikechukwuisaac70@gmail.com
Which driver package from the list should I download to use in a windows 10 environment. The driver and software I received with my Easycap capture device, USB DVR Capture v 4.0A Model No:DC60-007 by honestech is totally useless. The software does not allow us to change the video aspect and as a result we end up with a picture that stretches from top to bottom of screen, but is only about 30cm wide when we try to playback on our bigscreen TV.
I have the software you mentioned (Easier Cap DC60-007 usbtv007) and while it does produce both video and audio without problems, there is still an issue with the picture aspect using this driver. There is no selection for 16.9 aspect and as a result I ended up with good audio, but a picture that while it was the correct hieght, but was only 30cm wide. If I change the aspect ratio, then it records audio only and will not record video. I have read from other sights that Easier Cap DC60-007 usbtv007 does not work correctly with anything above windows 2000. It also states within the help file that it is not compatible with Vista, Win7 or 8.
Forget about my question! The problem was not the drivers, but the latest update on windows 10 (aug 2016). Somehow the update managed to mess up with driver installation. After taking ownership of three folders related to drivers on system32, I was able to get the easycap working.Thanks a lot, anyway!
hi guys, the driver is working well. but i need the application. i got honestecc in CD. i want to use ulead but when i tried to use the newest corel video studio, thats not supported. can you give me the best application for windows 10?
Hi, I have this system at home including the software, however with all the building alterations the sleeve of the disk was damaged and now I do not have the serial number for my software as I got a new PC and would like to install it. Is there anyway I can get the serial number without having to buy a whole new set of the easycap as I do not want 2 systems.
after many hours of searching i failed to get this to work but a friend help me out he sent me windows 8 drivers for dc60++ OEM Capture Usbtv007this driver works instantly just install and it comes with a software, just chose the Oem capture as the device in the software.already back up all my old VHS tapes.i want to help others so i upload the filelink:
I have had my EasyCap for several years (it began life under WinXP) I have run it on Vista, 7 and now on 10. The STK1160 works OK. I have never used the EasyCap to capture audio. Even when it works it has a poor dynamic range and lots of distortion. Much better to feed the audio into line in. You will probably need a twin RCA to 3.5mm stereo coax lead Remember to point your capture software to the correct audio input. My capture software is NCH Debut which is free for non-commercial use.
Hi VisserI lost my original CD but got my EzCap (SM_USB007) to work. However, none of my video editing software packages (Nero and Pinnacle Studio) are able to import/capture the input from the device. Any idea which free video editing software would do the job?
Hi,When i plug-in easyCAP, my computer (with windows 10) see it as USB2.0 PC Camera in device manager and assigns a Microsoft driver.Then the system do not allow to change it to any other driver provided within this page. When i remove and replug, same is happening. Please advise how to use easycap drivers instead of automatically assigned Microsoft drivers.
The windows 10 driver is a virus according to panda anti virus. For windows 8.1 none of this works I keep getting drivers not for this platform message, and if I let windows update itself I get driver up to date message.
No threats were detected by Windows Defender (Windows 10) on that download and no threat from Metascan online ( -online.com/#!/results/file/ee9b6b165f6d4f5290003b32721d2183/regular), looks like a false detection from your virus software.
just restart windows and Disable Signed Driver Enforcement. after it up, remove the unknown usb and install the driver. it will ask to restart, and after it up again, the system will recognize your easycap.
The latest version of honestech VHS to DVD SE is 3.0, released on 11/11/2016. It was initially added to our database on 01/26/2008. The most prevalent version is 2.0, which is used by 44 % of all installations.
honestech TVR 2.5 capturing video using techcom tv tuner ssd-tv-817_125_win7_support from SOLID HD S2 6024 set top box for Indian DoorDarshan Free Dish on W10-64 bit, Composite channel, no compatibility setting.
I tried to update driver of Tv tuner in device manager, windows searches and finds a driver of CINERGY Mini Stick but says, "driver is found but not able to install", no error number or message what prevented it from installing.
while installing it, it installs VC++ 2008 x86 9.0.90729.17, windows has automatically downloaded and installed both x86 and x64 versions of 9.0.90729.17 and also of 9.0.90729.6161, if that can give some clue.
Note :Plug in VGB100 USB stick before software installation ; Pause Windows Defender or other antivirus before installation.The activation key is written on the green label on the back of the CD cover.
Note :Plug in VGB350 USB stick before software installation ; Pause Windows Defender or other antivirus before installation.The activation key is written on the green label on the back of the CD cover. 2ff7e9595c
Comentários